Thermic Fluid
Heater
Thermic Fluid Heater Manufacturer in India
RK Engineering is a reliable Thermic Fluid Heater Manufacturer in India, offering vertical thermal oil heaters for industrial process-heating applications. Our heaters are designed for efficient heat transfer, stable temperature control and reliable continuous operation.
RK Engineering manufactures coal-fired thermic fluid heaters and can also customize oil-fired and gas-fired configurations according to available fuel and process requirements. The vertical coil-type design supports rapid heat transfer and consistent thermal performance.
What Is a Thermic Fluid Heater?
A Thermic Fluid Heater, also known as a Thermal Oil Heater, is an industrial heating system that transfers thermal energy through circulating heat-transfer fluid rather than generating steam.
The thermal fluid passes through a heated coil and carries energy to connected process equipment. This allows stable and uniform process temperatures to be maintained across industrial heating applications.
Thermic fluid heating is widely used where precise temperature control and indirect heat transfer are important, including textile, chemical, food, pharmaceutical, rubber, plastic, paper and oil-processing industries.
How Does a Thermic Fluid Heater Work?
A Thermic Fluid Heater heats circulating thermal oil inside a coil system and transfers the stored heat to connected industrial equipment.
Fuel Combustion
Coal, biomass or the selected fuel generates thermal energy inside the combustion chamber.
Fluid Heating
Heat transfers to thermic fluid circulating through the coil-type heating system.
Fluid Circulation
The heated thermic fluid circulates to the connected process equipment.
Heat Recovery
After releasing heat, the fluid returns to the heater and repeats the circulation cycle.
Thermic Fluid Heater Specifications
The following specifications are based on RK Engineering's current Thermic Fluid Heater product information.
| Specification | Details |
|---|---|
| Product | Thermic Fluid Heater / Thermal Oil Heater |
| Brand | RK Engineering |
| Tank Capacity | 150 – 400 L |
| Power | 5 HP |
| Material | Stainless Steel |
| Voltage | 320 V |
| Maximum Temperature | 250°C |
| Heat Output | Up to 1000 kcal/hr |
| Frequency | 50 Hz |
| Efficiency | Up to 85–90% Depending on Fuel Type |
| Fuels | Indonesian Coal / Indian Coal / Imported Coal / Rice Husk / Biomass Briquettes |
| Certifications | ISO 9001 / ASME-Compliant |
Key Features of Our Thermic Fluid Heater
Designed for stable thermal performance, efficient heat transfer and dependable industrial operation.
Five-pass configuration supports efficient utilization of generated thermal energy.
Coil construction supports fast and effective heat transfer to the thermic fluid.
Factory-assembled pre-insulated cyclonic combustor design supports efficient combustion.
Thermal oil circulation supports stable and consistent process temperatures.
Suitable for different coal grades, rice husk and biomass briquettes.
Efficiency can reach approximately 85–90% depending on the selected fuel.
The design is intended to reduce maintenance compared with traditional heating systems.
Designed to perform effectively with fluidized-bed combustion arrangements.
Applications of Thermic Fluid Heater
Thermic Fluid Heaters are used across industries where stable indirect heating and accurate temperature control are important.
Textile Industry
Used for dyeing, fabric drying, printing and maintaining consistent process temperatures.
Chemical & Petrochemical
Supports reactor heating, distillation processes and controlled chemical synthesis.
Food & Beverage
Suitable for edible-oil refining, baking, drying, sterilization and pasteurization processes.
Pharmaceutical Industry
Provides process heating for granulation, drying, coating and selected API manufacturing.
Rubber & Plastic Industry
Used for mold heating, rubber curing, plastic extrusion and lamination processes.
Plywood & Paper Industry
Provides thermal energy for veneer drying, paper drying and heated roller or press systems.
Coal Fired Thermic Fluid Heater
RK Engineering supplies Coal Fired Thermic Fluid Heaters with vertical coil-type design for efficient industrial process heating.
The heaters can operate with Indonesian coal, Indian coal, imported coal, rice husk and biomass briquettes depending on the required system configuration.
RK Engineering can also customize oil-fired and gas-fired thermic fluid heaters according to customer requirements and locally available fuel.
Available Fuel Options
- Indonesian Coal
- Indian Coal
- Imported Coal
- Rice Husk
- Biomass Briquettes
- Oil-Fired Configuration
- Gas-Fired Configuration
Factors to Consider When Selecting a Thermic Fluid Heater
The correct industrial Thermic Fluid Heater should be selected according to the process heat load, target temperature, thermic fluid and available fuel.
Providing accurate operating information helps RK Engineering determine suitable heater capacity, fuel system, fluid circulation and overall thermal design.
Thermic Fluid Heater Manufacturer in Ahmedabad, Gujarat
RK Engineering manufactures and supplies industrial Thermic Fluid Heaters from Ahmedabad, Gujarat, India, for controlled process-heating applications.
Industrial thermal equipment manufacturing from Ahmedabad, Gujarat, India.
Five-pass vertical design supports efficient heat utilization.
Maximum listed operating temperature up to 250°C.
Coal, rice husk and biomass options available according to configuration.
Listed efficiency up to 85–90% depending on fuel type.
Designed for reliable operation with reduced maintenance requirements.
Textile, chemical, food, pharma, rubber, plastic and paper applications.
Serving customers in India and selected overseas industrial markets.
Thermic Fluid Heater Supplier and Exporter from India
RK Engineering is a Thermic Fluid Heater Supplier and Exporter from India, providing industrial thermal oil heating systems for domestic and international process requirements.
We support industrial enquiries from Kenya, South Africa, Canada, and the United States (USA), along with customers across India requiring reliable thermal-fluid heating equipment.
Our Thermic Fluid Heater systems can be considered for textile, chemical, food, pharmaceutical, rubber, plastic, paper, plywood and oil-processing applications.
Industrial Thermic Fluid Heater for Process Heating
An Industrial Thermic Fluid Heater provides indirect thermal energy through circulating heat-transfer oil, allowing industrial equipment to maintain stable process temperatures.
Unlike steam-based heating systems, a thermic fluid system transfers energy through thermal oil circulating between the heater and process equipment.
RK Engineering manufactures Thermic Fluid Heaters in Ahmedabad, Gujarat for industrial users requiring dependable, uniform and continuous process heating.
Vertical Thermic Fluid Heater
RK Engineering supplies a Vertical Thermic Fluid Heater with a coil-type heating configuration and 5-pass design. The vertical arrangement helps provide compact installation and efficient thermal-energy utilization.
The factory-assembled pre-insulated cyclonic combustor is designed to support efficient FBC heating and reduced routine maintenance.
Thermal Oil Heater for Industrial Applications
A Thermal Oil Heater can maintain consistent process temperature across equipment such as reactors, dryers, presses, rollers and process vessels.
The heated thermic fluid circulates continuously, delivers thermal energy to the user equipment and then returns to the heater for reheating. This closed circulation supports stable industrial operation.
Thermic Fluid Heater FAQs
A Thermic Fluid Heater is an industrial heating system that heats and circulates thermal oil to transfer energy to process equipment without directly using steam.
RK Engineering currently lists a maximum temperature of approximately 250°C for its Thermic Fluid Heater.
The current product specification lists tank capacity from 150 litres to 400 litres.
Fuel options include Indonesian coal, Indian coal, imported coal, rice husk and biomass briquettes. RK Engineering can also customize oil-fired and gas-fired heater configurations according to requirements.
RK Engineering lists efficiency up to approximately 85–90% depending on the selected fuel type and operating conditions.
Thermic Fluid Heaters are used in textile, chemical, petrochemical, food, pharmaceutical, rubber, plastic, paper, plywood, oil-processing and related industries.
The 5-pass design provides multiple heat-transfer passes, helping improve thermal utilization and overall heater efficiency.
RK Engineering is located at Plot No. C/1/B-377, Phase II, GIDC Estate, Vatva, Ahmedabad, Gujarat, India.
Looking for a Thermic Fluid Heater?
Share your required operating temperature, heat load, thermic fluid, fuel preference and industrial application. RK Engineering can evaluate your Thermic Fluid Heater requirement for customers in India and international markets.
